JT Rear Shorty Inner Fender Liner / For Non - Factory Style Swaybars - Nemesis Industries
JT Rear Shorty Inner Fender Liner / For Non - Factory Style Swaybars - Nemesis Industries
JT Rear Shorty Inner Fender Liner / For Non - Factory Style Swaybars - Nemesis Industries
JT Rear Shorty Inner Fender Liner / For Non - Factory Style Swaybars - Nemesis Industries
JT Rear Shorty Inner Fender Liner / For Non - Factory Style Swaybars - Nemesis Industries
JT Rear Shorty Inner Fender Liner / For Non - Factory Style Swaybars - Nemesis Industries
JT Rear Shorty Inner Fender Liner / For Non - Factory Style Swaybars - Nemesis Industries
JT Rear Shorty Inner Fender Liner / For Non - Factory Style Swaybars - Nemesis Industries
JT Rear Shorty Inner Fender Liner / For Non - Factory Style Swaybars - Nemesis Industries
JT Rear Shorty Inner Fender Liner / For Non - Factory Style Swaybars - Nemesis Industries

Install Time

Estimated 1.0 Hour Install

compaitable with

JT

This may vary depending on experience

Download Install Guide

SKU: 166710

Instant access

PDF

JT Rear Shorty Inner Fender Liner / For Non-Factory Style Swaybars

SKU# 166710

Regular price$279.00
/
Shipping calculated at checkout.
Finish Options
Bare
Semi-Gloss Black Powder Coat (Cardinal BK-08)
Textured Black Powder Coat (Cardinal BK-59)

Precision-designed and 100% Made in USA.

  • Covers the electrical components at the front of both rear wheel wells.
  • Included brackets move the rear wiring harness and connector inward, between the body and frame.
  • Leaves the remaining wheel well open for modified JT builds using non-factory-style swaybars.
  • Built from .090" 5052 aluminum
  • Powder coat ready
  • Fits Falcon shocks for your vehicle application
  • Works with factory and most aftermarket fenders
  • Sold as a pair

Install Time

Estimated 1.0 Hour Install

compaitable with

JT

This may vary depending on experience

Download Install Guide

SKU: 166710

Instant access

PDF

Cover the Electrical, Not the Whole Wheel Well

Removing a rear inner liner opens up the wheel well, but it also uncovers electrical components you don't want left exposed. On the Gladiator, that includes the electrical components at the front of both rear wheel wells. The Shorty keeps those areas covered without carrying a full liner around the rest of the opening.

The idea came up while we were developing our full JT liner: could you run just the front section? That question became a separate liner built around the coverage that section provides. The left and right panels completely cover the electrical components at the front, giving those components a barrier against road debris.

That's the reason for the short shape. It isn't trying to enclose every part of the wheel well. It puts a panel where electrical components need coverage and leaves the rest of the design focused on your modified Gladiator.

Nemesis-branded Jeep Gladiator crossing a sandstone ledge on a rocky desert trail.

Move the Wiring Out of the Exposed Location

The wiring at the back of the wheel well needs a different solution from the electrical components at the front. The factory harness and connector sit outside the frame, where road debris can reach them. Covering the front alone wouldn't address that exposed location, so the Shorty kit includes the wiring relocation brackets from our full JT liner.

Those brackets move the harness and connector inward, between the body and frame. Instead of extending a liner across the wheel well to cover the connector where it started, the design changes where the wiring sits. The result is a less exposed location while retaining the open layout that makes this a Shorty.

It's a small part of the kit with a specific job. The front panels handle coverage, and the brackets address the wiring farther back. Both are part of the design because leaving the wheel well open shouldn't mean ignoring the components inside it.

Shorty liner installed at the front of a rear wheel well, with the tire, shock and frame visible.

Leave Room for a Different Rear Setup

A modified Gladiator doesn't always need a full enclosure inside the rear wheel well. When your build uses a non-factory-style swaybar, keeping that area open can be part of the plan. The Shorty is our JT rear liner option for that application, with coverage concentrated at the front instead of a liner wrapping around the entire opening.

That layout leaves the remaining wheel well open for modifications. You're not choosing a full liner and then deciding which sections you can do without; the shorter configuration is the starting point. It gives you a way to retain the targeted electrical coverage while keeping the rest of the area available for your build.

Choose this version based on the setup you're putting together, not just the look behind the tire. The Shorty serves a different purpose from our full rear liner for factory-style swaybars. The open layout is the point, rather than an unfinished step toward full coverage.

FITMENT GUIDE

COMPATIBLE VEHICLES:

• Jeep Gladiator JT

MODEL YEARS:

2020 - Current

WEIGHT SHIPPED:

6 lbs

WEIGHT INSTALLED:

2 lbs

TOOLS REQUIRED:

Nutsert tool with a ¼" - 20 mandrel (Available on our website)

"W" size drill bit (Available on our website)

7/16-inch socket and wrench

5/32-inch hex key / Allen wrench

INSTALL NOTES:

Level 2: Easy

Requires basic hand tools (screwdrivers, wrenches, sockets, hex keys). Products typically install using screws, standard bolts, and/or socket head screws.

INSTALL NOTES:

Level 2: Easy

Requires basic hand tools (screwdrivers, wrenches, sockets, hex keys). Products typically install using screws, standard bolts, and/or socket head screws.

FAQ

Frequently Asked Questions

This is the JT rear Shorty inner fender liner for non-factory-style swaybar applications. Nemesis also offers a separate full rear liner for factory-style swaybars. If you need to confirm a particular aftermarket swaybar or custom setup, contact us with the details before ordering.

No. The Shorty completely covers the electrical components at the front of both rear wheel wells and leaves the remaining area open. Included brackets relocate the rear wiring harness and connector inward, between the body and frame.

Yes. The kit covers the left and right rear wheel wells and includes the mounting and wiring relocation brackets. Some factory hardware and wiring retainers are reused as shown in the installation instructions.

The liners are built from .090-inch 5052 aluminum. Choose bare aluminum or one of the two black powder-coat finishes.

Yes. The installation guide shows how to disconnect and reroute the rear plugs, remove the factory bracket and secure the wiring to the included relocation brackets. The right side has one plug; wiring and hose details can vary with your JT configuration. Follow the guide for both sides.

The brackets locate from factory holes, and the assembly uses a combination of nutserts and through bolts. Installation starts with removing the factory inner liner. Factory-hole mounting does not mean you can skip the specialty tools: review the installation guide before starting.

The guide lists a nutsert installation tool with a 1/4-20 mandrel, a W drill bit, a 7/16-inch socket and wrench, and a 5/32-inch hex key. It also calls for anti-seize and red Loctite. Read the complete instructions and tool list before beginning; your vehicle configuration may require adjustments to that list.

166710 is bare aluminum. 166711 is semi-gloss black powder coat, Cardinal BK-08. 166712 is textured black powder coat, Cardinal BK-59. Use those finish codes when matching other parts.